Rectifier Transformer
Power & Control

Rectifier Transformer

Rectifier transformers are used for industrial processes which requires significant high current like electrochemical processes like chlorine production, Electrolysis processes for the production of aluminum where harmonic current are generated. Rectifier Transformers are also used to supply power where there are high current requirements as in Electroplating systems.
The secondary of these Transformers are generally low voltage with high current and are with high harmonics withstanding capacity.

Call +91 22 25922514
Electrolysis Process. Electroplating Smelting Operation

# Non-Standard KVA, Input and Output Voltage are also available on request.
# NEELKANTH reserves the rights to amend design and specification without notice as continuous efforts are Made toImprove product performance.
# Some of the features are optional depend on order.

Parameter Description
KVA Rating – Three Phase 50 to 5000 KVA
Cooling Air & Oil Cooled.
Input Voltage 415 - 3 Phase or as required.
Output Voltage Up to 100 V or as required.
Construction Double wound, Common core, Varnish and vacuum impregnated.
Winding Electrolytic grade Copper
Frequency 50 +/- 3 Hz / 60 Hz on request.
Insulation Class / Level F Class / 155 deg. C & H Class / 180 deg. C
Maximum temperature rise 115 deg. C.
Efficiency Better than 97 %.
Regulation 2 – 4 % or as required.
Galvanic Insulation Better than 500 Mega-Ohms - DC Isolation @ 2500 V
High Voltage Breakdown Test 2.5 KV for one Minute Between windings and Earth.
Termination Type Terminal Board / Stud – Bolts / Bus Bar
Enclosure Protection Class IP21 / As per Requirement.
Enclosure Finish Siemens Gray, RAL 7035 (Other color available on request).
Environment Temperature Range 0 to 45 °C. Suitable for indoor Tropical use 90% RH (non-condensing).
Life Expectancy 25 Years
  • High Torque Low Inertia Motor with Proportional Control.
  • High Rate of Correction.
  • Response time less than 10 m seconds.
  • Low losses. Efficiency better than 98 %.
  • Full function Auto / Manual & Lower Raise controls.
  • Voltmeter for Input & Output Voltages.
  • Output under & Over Voltage LED for Fault indication.
  • Advanced electronic circuits to maintain constant output voltage even on DG.