Voltage Stabilisers
Single Phase Air Cooled - 1 to 100 KVA
AC mains voltage fluctuations are a common phenomenon in power supply system. Such fluctuations may result into erratic behavior, malfunction or even break down leading to expensive repairs, production loss and missed commitments.
These Voltage Stabilisers are designed to ensure that their output voltage remain constant irrespective of the voltage swing in the incoming power supply.
Their high efficiency and the ability to withstand instant load variations make them an ideal choice for protection of expensive and sensitive equipment.
| Type | KVA Ratings | Model | Servo Motor | Input Voltage Range (VAC) |
Output Voltage (VAC) |
|---|---|---|---|---|---|
| Single Phase | 1 – 100KVA | SD – XXX SA – XXX |
PMDC / AC Synchronous |
170 - 270 | 230 |
a) Please contact our sales and application engineers for further guidance
b) Non-Standard Input Voltage Range and Output Voltages are also available on request
| Output Voltage Accuracy | 1% |
| Response Time | < 10 m.sec |
| Rate of Correction | Up to 105 V / Sec & Up to 70 V / Sec |
| Efficiency | Better than 98 % |
| Frequency | 47 – 53 Hz. |
| Effect of Load Power Factor | Nil |
| Wave form Distortion | Nil (Same as input) |
| Harmonic Distortion | None |
| MCB/MCCB # | At Incoming for Over Load and Short circuit protection. |
| Output Voltage Protection. | Electronics Adjustable Output Under and Over Volt. Alarm / time Delay Circuit with Output Voltage Trip. |
| Servo Motor Protection | Voltage Cut-off for Servo Motor at Input Under/Over volts |
| Environment | Temperature range – 0 to 45 °C. Suitable for indoor Tropical use 90% RH (non-condensing) |
| Construction | Enclosures to IP21 |
| Color | RAL – 7035 (Grey) |
| MTBF | Mean Time Between Failure – Better than 43,800 Hrs |
- Medical Diagnostic Equipment
- Electronic Equipment
- Lab Equipment
- Pharmaceuticals Machine
- Textile Machinery
- Process Controls
- Elevators
- Cold Storage
- Hospitals
- Residential
- High Torque Low Inertia Motor with Proportional Control.
- High Rate of Correction.
- Response time less than 10 m seconds.
- Low losses. Efficiency better than 98 %.
- Full function Auto / Manual & Lower Raise controls.
- Voltmeter for Input & Output Voltages.
- Output under & Over Voltage LED for Fault indication.
- Advanced electronic circuits to maintain constant output voltage even on DG.
- Ammeter for Load Current.
- Input Under and Over Voltage indication and Cut off
- Electronics Output Over Load.
- Ground Fault Monitoring with Trip and Indication / Earth leakage.
- Surge Suppressor (Metal Oxide Varistor)
- Surge Protective Device 8/20 micro sec. as per IEC 61000-4-4 / 61000-4-5.
- Stabiliser By pass Switch
- Auto Start with time delay.
Typical schematics for product installation
- # Non-Standard KVA, Input Voltage Range and Output Voltages are also available on request.
- # NEELKANTH reserves the rights to amend design and specification without notice as continuous efforts are Made to Improve product performance.
- # Some of the features are optional depend on model and as per order.